Skip to content
Cleaning Chemical Calculator
Open calculators

Pallet Configuration Calculator

How many containers and how much product a pallet configuration actually carries.

Inputs

Range: 1–200

Enter the measured or label value in the units shown.

Range: 1–100

Enter the measured or label value in the units shown.

Range: 0.03125–55 gal

Enter the measured quantity in the unit shown.

Result

Containers on a pallet
144 containers
Product on a pallet
144 gal
Reading: what this result means for the job
An ordinary pallet. The container count and the gallons below are what a purchase order is reconciled against, and both have to match what the distributor actually ships.
Applicability limit
The configuration assumes every case holds the same number of containers and every container is full. Real deliveries are often partial, and a case that has been opened and re-closed holds less than the case on the label. This is a planning figure for the values entered, not a measured result. Coverage rates, product yields and application rates are properties of a specific product, applicator and substrate, and the label or data sheet for the product you are using always takes precedence over the default here.
Check before the job

Working

Containers on a pallet
—
Product on a pallet
—

What to check

  • Use the cases per pallet and containers per case from the delivery note.
  • Check whether the pallet is a mixed configuration before adding it up.
  • Confirm the container volume on the label.

Related calculators

This is a reconciliation tool: it tells you what a single delivery brings so a purchase order can be checked against it. The packing configuration on a pallet varies by distributor, so use the one on the delivery note.